TOUCH
-FREE
TECHNOLOGY
REMOVING THE PAD
Lift the mop straight up by the handle until the Genius
Mop Head is hanging straight down. Press the pad
release button, and both sides of the head will drop
open, releasing the pad.
ATTACHING THE PAD
Release Button
Release Button
REMOVING THE MOP HEAD
Press the release button on the front of the mop body,
unlocking the Genius Mop Head.
Release Button
1.
Lift the mop straight up by the handle until the Genius
Mop Head is hanging straight down. Center the Genius
Mop Head above the pad. Press the release button on
the back of the mop body, and both sides of the mop
head will drop open.
2.
Slip the mop head’s 4 corner tabs into the 4 corner
pockets of the Dirt Grip™ Pad.
3.
Gently press the Genius Mop Head to the floor on one
side of the pad, and that side will click into place.
4.
Flip the other side of the head over onto the floor
to click into place.
STEAM
BLASTER™
TECHNOLOGY
When you need an extra burst of steam to clean tough,
dried messes and stuck-on stains, use the Steam Blaster.
1.
Flip the Genius™ Mop Head over so that it is behind
the mop body.
2.
Tilt the mop handle back. This will cause the Steam Blaster
to emit a concentrated blast of steam onto the floor.
3.
To stop the Steam Blaster spray, simply tilt the mop
handle forward.
4.
Flip the Genius Mop Head back into its original position
and continue cleaning.
4
2
3
1
For questions or to register your product, contact us at 1-800-798-7398 or visit us online at sharkclean.com
@sharkcleaning
