15
4.5 Software Function
Open the SHARE Data Manager on the desktop, select the camera model as
SHARE 6100 Pro, select the UAV model as the actual flying model, and click OK to
enter the interface to wait for connecting device. Insert the SD card and TF card of
the camera into the card reader then connect the card reader to the USB 3.0 port of
the computer. The drive letter driver may need to be installed when connecting to
the PC for the first time. Please be patient. After the drive letter is identified, the
software interface will be automatically switched to the device details interface.
The device details interface consists of three parts. The first is the function list
which is displayed on the left. The second is the connection status and capacity of
memory, which is displayed on the upper part on the right . Click the status bar of
each drive letter to open the corresponding folder. The third one is the flight sorties
which is showed on the bottom half on the right. When the mouse is placed over the
sorties it shows the number of POS and photos contained in the sorties.
There is also a "Disconnect" button in the lower left corner. If you do not need to
use the camera, click this button to pop up the drive letter, and then unplug the card
reader.