78
5.3.4.13 Network Priority
This interface is for you to set network priority. The default setup is PPPoE>WIFI>3G>LAN. See Figure
5-37. You can change if necessary.
Default gateway: It is to display current default gateway. It is to display PPPoE if PPPoE dial succeeded.
Priority: The value ranges from 0 to 3. 0 has the highest priority.
Name: It is to display network name. Use
/
to move current item up/down.
Note:
PPPoE always has the highest priority. You can change the priority of the rest three items.
Figure 5-37
5.3.4.14 Auto register
This function allows the device to auto register to the proxy you specified. In this way, you can use the
client-end to access the DVR and etc via the proxy. Here the proxy has a switch function. In the network
service, device supports the server address of IPv4 or domain.
Please follow the steps listed below to use this function.
Please set proxy server address, port, and sub-device name at the device-end. Please enable the auto
register function, the device can auto register to the proxy server.
1) The setup interface is shown as in Figure 5-38.
Important
Do not input network default port such as TCP port number.
Figure 5-38
