media Console Table
-
P
age
|
5
s
Hanty-
2-C
hic.com
1
16"
16"
16"
16"
2 ¾"
24 ¼"
8 ¾"
34
7
/
8
"
34
7
/
8
"
2
31 ¼"
31 ¼"
3 ½"
6"
1 ½"
23 ½"
1 ½"
2"
3 ½"
2 ½"
3 ½"
34 ½"
3
16"
37 ¼"
16"
16"
16"
37
7
/
8
"
37
7
/
8
"
1.
After cutting all the 16" strips of plywood to the various lengths
drill ¾" pocket holes into one end of the 37 ¼" long side panels.
Attach to the 72" long top panel with wood glue and 1-¼"
pocket screws as shown, making sure the outside edges are flush.
For reference, currently the console table is shown upside down.
2.
Next you will attach the shelves. Drill ¾" pocket holes into both
ends of all shelves. Attach to the carcass with wood glue and
1-¼" pocket screws; spaced as shown with pocket holes facing
up.
Flip the console right-side up. Fill in any pocket holes you may
see with wood filler. Fill the outside exposed edges of the top ¾"
plywood with wood filler. Allow to dry and sand smooth.
3.
Now for the face frame. Cut your 1x4, 1x3 and 1x2 boards to length
as shown. Make sure to double check the size of the carcass in Step
2. Your face frame should line up exactly with the outside edges.
Make any adjustments to your lengths prior to cutting.
Drill ¾" pocket holes into the ends of the boards as shown.
Attach with wood glue and 1-¼" pocket screws; spaced as
shown.
X 6
