User’s guide
HRT/D
-
7
-
HS
Installation
4.1
ASSEMBLY
1.
Remove packaging
2.
Place the machine on a level floor with sufficient space around and above the machine.
3.
Level the working surface of the machine, using shims under the feet if necessary.
4.
Ensure there is adequate ventilation and lighting at the workplace.
5.
Avoid draughts, in order to prevent uneven heating.
When moving the machine with a forklift truck ensure that the machine is supported
right in the centre.
Also use sufficiently long prongs on the forklift truck.
4.2
CONNECTING POWER CABLE
1.
Check that the rating of the electrical system is adequate (see technical data).
2.
Plug in the machine.
4
