#1
#2
13
12
EN
4.7 EYE TREATMENT
1. Using the Precision Ball Attachment, place device underneath
left eye at the inner corner of the eye (Position 1), and glide
slowly outward, towards outer corner of eye, following the orbit-
al bone. Make sure not to directly hit the eyeball.
2. Place device underneath the brow above the eye, at the inner
corner near bridge of nose (Position 2) and glide outward, while
lifting.
3. Repeat each movement 3 times.
4. Repeat steps 1-3 for right eye.
4.8 FINISH
Upon completion, turn power off ( ) and wipe down the Wand us-
ing a clean, damp cloth and mild soap or water. As a general rule,
DO NOT USE cleaning solutions containing alcohols, including
isopropanol, ethanol and acetone, nor any cleaning solutions con-
taining chlorine; any of these could cause damage to the Wand
and accessories.
IMPORTANT: DO NOT SUBMERGE THE WAND INTO WATER OR
OTHER LIQUIDS FOR CLEANING!
Using your fingertips, massage any excess Hydra Prep Gel into
your skin.
Summary of Contents for FACIAL SCULPTING WAND
Page 2: ......
