background image

9

OPTION 2 - 

IN-GROUND ANCHOR

For installation you will require:

•  Wheelbarrow and Spade.

• 

Concrete Mix - Not included. Can be purchased from your closest building supply store eg Home Depot / Bunnings.

•  Spare wooden planks or other bracing materials
• 

Hex Key Set - Included in your umbrella box

 

       

Step 1 

Choose your site and ensure the ground is level. Check for buried utilities. 

Step 2 

Dig your footing hole at least 500mmW x 500mmL x 600mmH / 1’7” x 1’7” x 1’11”. It is recommended that  

 

you flare the footing hole slightly at the base for extra stability - See

 

Figure 8.

Step 3  

Using the Screws supplied with your Umbrella, fit the spigot to the In-Ground Anchor. - See

 

Figure 7.

Step 4 

Prepare the concrete mix in your wheelbarrow.

Step 5

  Position the In-Ground Anchor in the hole and use the spirit level on the Spigot to ensure the anchor  

 

 

is level. See 

Figure 7.3 

for where the ground level should be. Ensure orientation is correct for how you  

 

 

wish to position your umbrella - see 

Figure 1

 and 

Figure 8

 (pages 6 and 10).

   Warning: 

It is vital that you ensure the Bolt oles on the Spigot & In-Ground Anchor are orientated correctly.

Step 6

  Pour concrete into the hole up to the bottom of the Spigot base.

  

DO NOT

 cover any part of the Unity Spigot. See

 

Figure 7.

Step 7

   Use bracing and support to ensure the In-Ground Anchor and Spigot stay level.

Step 8

  Allow at least 24-hours for the concrete to cure as per your chosen products recommendation. 

Step 9 

Slide your Rotation Plate over the Spigot and move on to 

Stage 4.

Figure 7 

- In-Ground Anchor

1.

2.

3.

In-Ground Anchor

Screws

Unity Spigot

Rotation Plate

In-Ground Anchor

Ground level

Note:

 Do not cover the Spigot

Figure 6 

- Freestanding Base Parts 

1.

2.

3.

4.

5.

Base Cover

Optional Wheels / Castors

Pavers

Unity Spigot

Rotation Plate

Base Frame

Unity Spigot

Unity Screws*

*

Both Serenity and Unity Screws are included in box. Only use the set required for your Unity (Serenity Screws will be surplus).

Serenity Screws*

NOTE: 

12 Pavers stacked in 3 layers. Pavers are not supplied. 

Nuts

Threaded Feet

Summary of Contents for UNITY Octagon Duo

































Reviews: