SCM-MFD-LC-KIT
OPERATION MANUAL
SCM-MFD-BRIDGE
SCM-MZ-LC
SCR-24-CC
Underwater
Lights
Defaults to Zone 1
3.5mm Female
Audio Jack
4 x Channels of RGB Lighting
(supports up to 15A per channel)
Shadow-NET
12V DC
Power Source
10-30V DC
Power Source
RGB Zone 1
RGB Zone 2
RGB Zone 3
RGB Zone 4
SCM-SL-CC
Spreader Lights
Defaults to Zone 3
SCM-DLX-CC or
SCM-DL-CC Down
Lights
Defaults to Zone 2
SCM-MFD-LC-KIT TYPICAL WIRING DIAGRAM
MFD
Shadow-Caster
®
LED Lighting | 2060 Calumet Street. | Clearwater, FL 33765
p:
1+ 727.474.2877
e:
w:
shadow-caster.com
4
SCM-MFD-LC-KIT OVERVIEW
The Shadow-Caster
®
MFD Lighting Control Kit (SCM-
MFD-LC-KIT) includes the Multi-Zone Lighting Controller
(SCM-MZ-LC) and the MFD Bridge (SCM-MFD-BRIDGE).
The SCM-MZ-LC Lighting Controller supplies fused
power connection for up to 4 separate zones of user
selectable RGB or RGBW lighting. It can receive an
analog music input, and also broadcasts multiple
channels of digital commands to other devices on the
Shadow-NET
®
Bus (orange and yellow wires).
The SCM-MFD-BRIDGE provides a control interface to
the Multi-Zone Lighting Controller through an Ethernet
connected MFD (Multi-Function Display) or other
connected device.
The control interface steps you through selecting and
naming a desired number of control zones. The setup
process will also identify all additional Shadow-NET
®
connected devices and assign them to the desired
lighting zone. The zones can then be assigned to a
desired color and brightness or even configured for
an active lighting program. The program is saved as a
unique 'lighting scene' for easy recall.
At initial power up the Shadow-NET
®
bus will broadcast
messages to tell connected devices to turn off. This
allows these devices to be used without a dedicated
switch. When the SCM-MZ-LC controller receives a
command to turn on, it will send a corresponding
command to devices connected on the Shadow-NET
®
bus.
Note:
Lighting connected to outputs 1-4 of the SCM-MZ-LC will always
correspond to zones 1-4 in the lighting application. Shadow-Net
®
connected lights can be assigned to any zone 1-6.
