To assemble the support bars, you will need to start by collecting the following parts:
Parts
Quantity
Short Bolts with Nuts
28
57.5
” reinforcement bar
14
3
0” reinforcement bar
7
6)
Attach a 57.5
” reinforcement bar to each A2 connector
. Then connect the rest of the 57.5
” reinforcement
bars to each B2 connector using a nut and bolt. (You will not want to tighten the nuts and bolts until all are
installed)
7)
Attach one end of each 30
” reinforcement bar
to each A1 and B1 connector using a nut and bolt.
8)
Bringing the ends of the three bars together, connect using a nut and bolt.
9)
Once everything is connected, tighten all nuts and bolts.
