Shadesign SHADEONE Twister-Sail Installation Operation & Maintenance Download Page 9

9

INTENDED USE

4.

The shadesign crank-operated height adjuster is first and foremost intended as a product 
to adjust the height of the shadesign Twister-Sail. Any different or additional uses shall be 
deemed as contrary to the intended use. The manufacturer assumes no liability for damages 
resulting from such uses. No modifications, additions or alterations may be made to the 
system without the permission of the manufacturer. Defective system components must 
be replaced immediately. Only the manufacturer’s original replacement parts may be used. 
There is no guarantee that components from other manufacturers have been designed and 
manufactured to bear sufficient loads and comply with safety standards. Placing additional 
loads on the Twister-Sail’s crank-operated height adjuster by hanging objects onto it can lead 
to the system being damaged or falling down and is therefore not permitted. Installation and 
maintenance work must only be carried out by qualified specialists.

5.2   ROLLING UP THE TWISTER-SAIL  

USING THE CRANK-OPERATED HEIGHT ADJUSTER

Before the Twister-Sail is rolled up, it is important to check that the tension cables for 
the height-adjustable columns are raised to the very top. The Twister-Sail should only 
be rolled up if this condition is met.

If the tension cables for the height-adjustable columns are in their lowered state and the 
Twister-Sail is rolled up, this can lead to the height-adjustable columns being overloaded and 
permanently damaged, and the Twister-Sail could also be damaged!

OPERATING THE TWISTER-SAIL

5.

5.1  UNROLLING THE TWISTER-SAIL  

USING THE CRANK-OPERATED HEIGHT ADJUSTER

Before the Twister-Sail is rolled out, always ensure that the tension cables for the 
height-adjustable columns are raised to the very top. The tension cables for the height-
adjustable columns can only be lowered using the hand crank once the Twister-Sail has 
been rolled out completely.

When the cylinder is rolled up, the tension cables for the height-adjustable columns are 

not

 to 

be lowered. This can lead to the height-adjustable columns being overloaded and permanently 
damaged, and the Twister-Sail could also be damaged!

Summary of Contents for SHADEONE Twister-Sail













Reviews: