background image

10

W A R R A N T Y :

Upon receipt of your Polaris, please check to ensure you have received all of the parts.

NOTE: Wind damage is not covered under any manufacturer’s warranty.

5 Year Limited Warranty includes the LIBRA, ASTRAL-TC, SIRIUS, POLARIS,
ORION and GALAXY styles.

This includes the mast, boom, head fitting, elbow, center

pole/sidepost, arms, ribs, top and bottom hub, and stainless steel hardware only. If
there is damage under the warranty, Shademaker will replace and/or repair any item
listed in this category at its discretion. Labor charges are not covered under this limited
warranty.

10 Year Limited Warranty includes the Sunbrella® awning & marine grade
Fabric Collection.

Visit www.sunbrella.com/warranty for more details. Labor charges

are not covered under this limited warranty.

5 Year Limited Warranty applies to Sunbrella Firesist®, Sunbrella Firesist®
PLUS and Sunbrella® furniture grade, and O’bravia® awning grade fabrics.

Labor charges are not covered under this limited warranty.

1 Year Limited Warranty covers base wheels and the powder coat finish on all
bases.

If the powder coat finish flakes, bubbles, peels or loses color; Shademaker will

re-finish or replace the defective bases at its discretion. Normal wear and tear is not
covered under this limited warranty. Labor charges are not covered under this limited
warranty.

Caution: 

Seaside and indoor pool use, salt & chlorides can accumulate on the powder

coat finish, leading to finish failure. Failure or neglect to make needed cleanings may
cause paint to blister, and such failure will void limited warranty.

Exclusions: 

Wind damage, acts of nature (such as, but not limited to, freezing or any

type of extreme weather). Failures caused by abusive use and normal wear and tear are
not covered under this warranty. Any Galaxy style that does not have spacer buttons
installed.

Parts can be ordered under warranty at no charge, if found that the damage is a
manufacture defect and/or purchased out of warranty to make them whole again. 

IMPORTANT RESTRICTION FOR SM PRODUCTS WARRANTY SERVICE:

Shademaker restricts warranty service for SM products to the country where
Shademaker or its authorized SM retail Dealers originally sold the product.

Those filing warranty claims will be responsible for all shipping, handling and freight
charges on all claims to Shademaker in Baldwin Park, CA.  All warranty claims must be
submitted with the original proof of purchase, date of purchase, name of dealer and the
description of the damage.  An authorized Shademaker RA# must be listed on all
products being returned. The Shademaker warranty is not transferable. Shademaker
reserves the right to repair, replace and/or redesign any product that is returned under a
warranty claim. 

For current warranty information, please visit www.shademakerusa.com.

T O   P R O P E R L Y   F O L D   C A N O P Y

The 100% solution dyed canopy will last longer if you fold it as it was packed and
shipped.  This technique is similar to the way a parachute is folded and is especially
important when folding the canopy for seasonal storage or when left in the closed
position for an extended period of time.  

Using this technique at all times will significantly extend the life of
the canopy.

1. When the canopy has been fully lowered, stand in front of the

canopy structure and begin the folding process by pulling out
two panels opposite the mast.  

   Pull the two panels together and roll tight into the canopy.

2. Once rolled tight, pull adjacent panels out one at a time and

fold to the center, alternating sides until all the panels have
been pulled out from the arms and folded into the center.

3. Wrap provided strap around canopy to secure.

P R O T E C T I V E   C O V E R

1. Screw rods together and insert into slit of the cover.
2. Unzip cover.
3. Using the rod as a guide, slide cover over your umbrella. 
4. Pull on string to zip down your cover and tie.

M A I N T A I N I N G   F R A M E   &   F I T T I N G S

1. Hose frame with water periodically, more often if installation is in a salty or industrial

environment.

2. Inspect the installation fitting, mount bolts, rib spacers, etc. on a regular basis and

tighten if necessary.

M A I N T A I N I N G   C A N O P Y   F A B R I C

1. Clean up spills and stains right away. Spills can be removed by using a clean

absorbent cloth.

2. For general maintenance, use a soft brush to remove dust and dry soil. Wash

down with clean, warm water (i.e., garden hose) every so often to avoid dirt
becoming ingrained. Allow the fabric to air dry before closing the canopy.

3. If a thorough cleaning is necessary, sponge over the fabric using a mild soap

solution (2% solution). Rinse well with plenty of water to remove all soap residue.

4. Never use detergents, cleaning fluids or solvents. Grease and oil stains may be

removed by using turpentine or similar with an absorbent cloth.

5. Please visit the fabric websites for more details: www.shademakerusa.com or

www.sunbrella.com

6. Use protective canopy cover during storage or when not in use.

R E M O V A L   &   R E P L A C E M E N T   O F   C A N O P Y  

Follow these instructions should you choose to replace your canopy with a new canopy.

1. Lower the canopy to the closed position.
2. Remove the button/screw at the end of each arm.
3. Separate the Velcro strap along the main canopy arm and remove the canopy from

the structure.

4. To replace the canopy, reverse the above process. 

Summary of Contents for POLARIS-30S













Reviews: