6
1
TABLE OF CONTENTS
Page No.
Parts List
2
Assembly Instructions
3
Operating Instructions
4
Safety and Precautions
5
Warranty
6
WARRANTY
Shademaker manufactures all its shade styles from the finest aluminum alloys to
ensure the strength, durability, and integrity of each and every style. We pride
ourselves as a totally vertical operation. This means that we manufacture and
produce over 90% of the components used in our products from the raw state. We
can monitor every stage of the manufacturing process and maintain a consistent
level of quality. Our only business and focus is shade and shade type products. Our
goal is that each and every Shademaker style will exceed your expectations at a
competitive price that will make you smile.
Replacement parts can be ordered under warranty at no charge, if found that the
damage is a manufacture defect.
Upon receipt, please check to ensure you have received all of the parts.
1 Year Limited Warranty
• Stem
• Powder coat finish
What Is NOT Covered:
Failure caused by unreasonable or abusive use, or failure
caused by neglect of reasonable and necessary care, and any modification to
product are not covered by this warranty.
This warranty covers return freight of any warranted product only for the first year.
This warranty gives you specific legal rights and you may have other rights which
vary from state to state. If the powder coat finish flakes, bubbles, peels or loses
color; Shademaker will re-finish or replace the defective bases at its discretion.
Closeout and promotional items sold by the dealer as is are not covered by this
warranty. Labor charges are not covered under this limited warranty. Normal wear
and tear is not covered under this limited warranty.
Caution:
Seaside and indoor pool use, salt & chlorides can accumulate on the
powder coat finish, leading to finish failure. Failure or neglect to make needed
cleanings may cause paint to blister, and such failure will void limited warranty.
Irregularities in Production Process:
The possibility of “Irregularities” in the product
surface may occur during the production process. However, these irregularities
do not reduce the quality of the product. Shademaker monitors every stage of
production to ensure a clean and consistent appearance on every part.
Rust:
Rust is a natural part of the aging process of all steel based materials and
is therefore NOT considered a defect. Steel plate bases are designed to require
minimum maintenance. Bases should be kept clean. Do not let dirt build up on the
bases. Never leave bases standing in water. To keep your bases looking their best,
you may wish to store them when not in use for an extended period of time.
International Returns:
If an item is found to be under warranty Shademaker shall
only be responsible for ground shipping charges to the location of the product
within the continental United States and Canada. Any duties, express, international
or special shipping charges are at the expense of the retail dealer or consumer.
