ShadeLab ILIOS RAY, Installation Manual

Page: 16 / 20

14 I ILIOS RAY I
INSTALLATION – REV 00
Fixing of the anchoring bracket
Fix the anchoring brackets in the correct position – they must respect the sizes indicated and be
parallel
ATTENTION: the wire axis MUST be the same level on both orientations, otherwise the terminal bar
may move incorrectly
Fixing of the wire to the anchoring bracket
PHASE 1: assemble the tensioning kit
PHASE 2: Insert the wire into the tie-rod and pull it downwards.
ATTENTION: Block the wire while keeping the tensioning kit upwards.
PHASE 3: While keeping the tie-rod tight, screw the nut with the ring combination spanner until the
spring is compressed about 5 mm
ATTENTION: the spring MUST NOT be totally compressed