ShadeFX Installation Guide
20
REV
. 0
3/2
021
Post-installation
Rotating the Canopy
Changing the canopy orientation requires the removal of the post caps on the arms. This can be done by inserting
a flat screwdriver into the small slot in the post cap to pry the cap off.
Completely remove the hex bolt while being careful not to drop the washer
Hold the track supporting beam and slowly release the nut on the protruding thread until rotation is possible
Tighten nut and bolt to secure in place
(
Canopy Tilted Forward
position shown above)
Rotation can be done with the canopy still attached but it is recommended that it be retracted in the middle of the
track supporting beam.
