6
o
f
9
Step 2:
Attach the Base Plates (G) to the Corner Post (K) using Bolt, Washer and Nut (I). See Figure 4.
Step 3:
Attach the 2 Assembled Short Cross-Beams (E1, E2) and Long Cross-Beams (F) to the Corner Posts
(K) with Bolt & Washer (O). See Figure 5.
Note:
This step requires help from a third person.
Note:
The round steel rail welded on the Cross-Beam must face the inside of the gazebo.
Note:
The Assembled Short Cross-Beams are on opposite sides of the gazebo and the Long Cross-
Beams are also opposite each other.
III. Roof Frame Assembly:
Step 1:
Insert the “Push Button” end of the Long Corner Roof Support (B) to the Center Roof Connector (A)
until “Push Button” locks. See Figure 6. Align the opposite end of the Corner Roof Support (B) with
the Small “U” Bracket (L) on the Corner Posts (K).
Secure the Small “U” Bracket (L) by tightening Screw (P) then attach the Long Corner Roof Support
(B) with Bolt and Nut (N). See Figure 7.
