6
08 Use of the product / Installation
Before use, check the completeness of the parts supplied and the intactness of
the product. If damaged, it must not be put into operation. This product may
only be installed by a qualified technician.
Installation:
1. Disconnect from the mains.
2. Secure against being switched on again.
3. Verify that there is no voltage to your cable.
4. Follow the enclosed instructions. (fig 1.)
Warning: When the LEDs keep glowing, please check if you connected the flood-
light correctly (L/L, / and N/N) (Fig 2.)
09 Operating the product
The safety instructions and warnings must be observed to ensure both the per-
fect condition of the product and safe operation.
10 Product maintenance
The driverless floodlight can be cleaned with clear water and a soft cloth. Do not
use detergents containing surface active agents or scouring agents.
12 Information about special tools, devices
Depending on the mounting surface, you need a pencil, level, drill, screws, wall
anchors and screwdriver for mounting. To install the floodlight you need wire
cutters, wire strippers and a slotted electronics screwdriver.
11 Accessories, consumables, spare parts
For this product there are no accessories or replacement parts available.
≥
200 mm
2,3-3m
(fig 1.)
L
N
(fig 2.)
easy to connect
3007XX-MAN-ML-2017122001-SHA - Complete Book A5.indb 6
2017-12-20 13:09:15
