OPERATION OF THE APPLIANCE
10/12
You may adjust heat produced within the device and roasting level of the slices
accordingly.
by setting commutator position.
During first operation you may smell odor generated within the device, wait for
approximately 20 minutes, it will diminish.
Place the slices to be roasted on slice feeding panel at the front of the device. Slices
placed in the panel will slide automatically and start to roast.
Set the outcome direction setter (seen on the installation diagram) to decide on the
height of the out coming slices. You may get the roasted slices either from front or
from back.
Turn the switch to “0” position after daily use. Disconnect from the power supply at the
time relay.
After disconnecting from power supply clean the device up.
It is recommended to operate the device between temperatures of -5ºC +40ºC and in
ambient humidity of maximum 65%.
This part shows toast position of the bread
OPERATION OF THE DEVICE:
Conveyor toaster is used in kitchens of restaurants, fast food stands, canteens,
hospitals in order to Roast bread.
Before initial use of the device, the outer surface should be wiped with a cloth soaked
in warm water and soap.
NOTE: Do not use except purpose of use. The device should be operated by
qualified personnel knowing safety terms and technical specifications and
who has read the instruction manual.
1. Take the conveyor toaster out of its packing carefully.
2. Plug the power cable to power connection with grounding.
3. Turn the commutator on to operate the machine.
1
3
2
Heater power control switch
1-Low toast
2-Middle toast
3-High toast
