PAGE 35
PAGE 34
7. MAINTENANCE - SAFETY LOCK
Stop operation if the safety lock is defective.
(1) Safety lock
The safety lock is the switch to disable the throttle trigger,
the throttle trigger can only be used when the safety
lock is pushed down.
1. Check if the throttle trigger does not move when you do
not push the safety lock.
2. Check if the throttle trigger moves when you grasp or
release it while pushing the safety lock.
3. Check if the safety lock returns to its original position when
you release your hand from the safety lock.
• If you find any defects at the checks above, contact SGS.
WARNING
7. MAINTENANCE - ANTI-VIBRATION & AIR FILTER
ANTI-VIBRATION
A damaged or deformed anti-vibration system may cause
damage to the machine.
The air filter, if clogged, will
reduce the engine performance.
Check and clean the filter
element in warm, soapy water
as required. Dry completely
before installing. If the element
is broken or shrunk, replace with
a new one.
AIR FILTER
Check regularly for any
damage or deformation of
the rubber cushions and/or
the springs.
WARNING
WWW.SGS-ENGINEERING.COM
CALL FOR ASSISTANCE:
01332 576 850