Page
3
of
3
CALIBRATION
1) Attach the calibration adapter by placing it over the top of the PPI sampler.
2) The tubing connected to the calibration adapter connects to the calibration device.
The outlet of the PPI (from which the black cover was removed) will be connected to
the pump tubing. Allow the pump to warm up for at least 1.5 minutes to achieve a true
flow.
TWISTING THE CALIBRATION CHAMBER MAY CAUSE YOUR SAMPLER TO
OPEN, AND NEGATE YOUR SAMPLES. Simply pull up on the calibration chamber
to remove.
3) When calibration is complete, place the calibration adapter back in its bag and ship
back to SGS Galson.
CALIBRATION CHAMBERS ARE NOT DISPOSABLE AND
MUST BE RETURNED TO SGS GALSON. FAILURE TO DO SO
WILL RESULT IN REPLACEMENT FEES.
Questions? Contact SGS Galson 247/365 at 1-888-432-5227
PUMP-FORM-138 Ver:1 Appr/Eff Date:01/15/2021 - 01/15/2021 Approved By: CPIERCE
