SGM Technology for lighting
GB
User Manual 1.00
Varismoke II DMX
8
1.4
V
ARISMOKE MAIN FEATURES
Varismoke is a smoke machine with adjustable smoke output.
The smoke intensity can be adjusted externally by means of the DMX channel:
when the DMX value is included between 0÷5 there is no smoke output
when the DMX value is included between 5÷255 the smoke intensity is adjusted from minimum to
maximum linearly.
The DMX channel can be set by the dip switch (7) located on the rear panel. (par. 2.4)
Five different external indicators. Recessed mains supply connector with built-in fuse, mains luminous
switch. Internal fuse on control circuit power supply, internal heater element over-heating cut-out.
2 liters fluid tank. Remote control unit supplied as standard.
The V
ARISMOKE
machine can be controlled externally by means of 2 different controls; by S
MART
C
ONTROL
(sea
S
MART
C
ONTROL MAIN FEATURES
), or using any DMX controller.
1.5
V
ARISMOKE TECHNICAL FEATURES
POWER SUPPLY:
/-20% 50Hz 2000W max
HEATER ELEMENT:
1800W
WORKING TEMPERATURE:
320°C +/-5%, WARM UP from 20C to 320C 110sec. +/- 10%
CONTROL INPUT:
DMX 512
FLUID TANK CAPACITY:
2 liters
DIMENSIONS:
WxLxH, 298x410x185mm
WEIGHT:
9Kg
1.6
S
TARTING ADDRESS
For the DMX512 connection, the machine has to be correctly configured. The starting address is set by
the dip-switch located in the rear side of the Varismoke. The address can be modified even when the
machine is on.
Varismoke
1
2
4
8
16
32
64
128 256
Varismoke Channel (ch1)
Varismoke Channel (ch13)
on
on
Varismoke Channel (ch26)
on
on
on
Varismoke Channel (ch39)
on
on
on
Attention! Always refer to the numbers printed on the rear panel of the Varismoke and not to the ones
found on the dip-switch itself.
www.audiovias.com
