SGM G-PROFILE, User Manual

Page: 37 / 72

37
Maintenance
When cleaning the fixture, do not use any product that contains abrasives or solvents that can damage plastic or painted sur-
faces. Use a clean cloth with water and a standard household cleaner.
To maintain adequate cooling, fans must be cleaned periodically.
Upgrading the firmware
The firmware installed on the fixture can be identified using the “Info → Software version” menu. We recommend that you keep
your fixture’s firmware up-to-date. Visit http://www.sgmlight.com to download the latest firmware.

To perform firmware updates, you need a Windows-based personal computer and a SGM USB 5-Pin-XLR upload cable (avail-
able from your SGM distributor).
Cleaning
To maintain optimal performance, regular cleaning is essential. Cleaning schedules will vary greatly depending on the

operating environment, and the installation should therefore be checked at frequent intervals within the first few weeks of op-
eration to see whether cleaning is necessary. This procedure will allow you to assess cleaning requirements in your particular
situation. If in doubt, consult your SGM dealer for a suitable maintenance schedule.
Setting the OLED display saver
By default the OLED display dims down after a short period when the control panel is not in use, but it can also be set to turn
off completely. Pressing any key will always turns on the display or restore it to normal brightness. To change the display
saver, use the “Settings
→ Display Off” menu.
NOTE: To avoid the risk of display deterioration caused by long term use in permanent installations, it is recommended to use
the “Settings → Display Off” setting.
Manual_G_Profile_EN_170x113,3.book Page 37 Wednesday, December 9, 2015 10:17 AM