HOW TO USE
The heated blanket wraps you in comfortable warmth during the cold night. It is
not designed for use with animals. Inappropriate use can damage the surface
of the heated blanket and the fixing of the heating wires. If damaged, the
heated blanket must not be used anymore. In this case please contact the Sgl
service hotline
Make sure Connection Clutch (7) is securely connected.
After 30 minutes pre-heating the desired temperature is reached, and will
maintain for another 150 minutes unless the blanket gets switched off before.
The bed should be warm not hot. The heat is difficult to determine when
touching with your hands, other than the heat pillow. The hand is not as
sensitive towards heat as other body parts. After usage, fold the blanket and
put it back into the package.
Turn on heat
Put plug into 220V AC electrical outlet. The Heating Pad is ready for use.
Select from 4 heat settings by pressing ON/OFF button successively to
achieve desired heat level. To turn off, you must scroll through the remaining
heat settings by pressing the ON/OFF button sequentially. The 4 heat
settings with different LED indicators:
- The green LED indicated for Warm level.
- The yellow LED indicated for Lower level.
- The orange LED indicated for Medium level.
- The red LED indicated for High level.
Note: If the heat level indicators do not light up or stay on, the plug or control
connector may not be firmly and completely connected. Unplug from wall outlet,
check the Heating Pad connection again and re-plug into outlet.
Automatic switch off
180 minutes after switching on (30 minutes pre-heat and 150 minutes
maintenance) the heated blanket switches off automatically. If the blanket
should stay in use you have to switch on. Afterwards the blanket is ready for
another 180 minutes use.
Attention: Extended use may lead to burned skin.