PRESSURE LEAK DETECTOR
DLR-GS ..
06/08/2020
- 34 -
11. Disassembly and Disposal
11.1 Disassembly
Prior to and during works, make sure the unit is free of gas and the
breathing air contains sufficient oxygen levels.
Seal any openings gas-tight through which an explosion atmosphere
can carry over.
Avoid using spark-producing tools (saws, parting grinders, etc.) for
disassembly whenever possible. Should this be unavoidable, how-
ever, comply with EN 1127 or the area must be free of explosive at-
mosphere.
Avoid the build-up of electrostatic charges (e.g. through friction).
11.2 Disposal
Properly dispose of contaminated components (possibly through out-
gassing).
Properly dispose of electronic components.
Disassembly and Disposal