Installing/Removing the Antenna
Screw the antenna into the connector on the top of the radio by
holding the antenna at its base and turning it clockwise until it is
secure. (See Figure 7)
To remove the antenna, hold the antenna at its base and turn it
counter-clockwise until it is released from the thread.
Note: S618PMR version is with fixed antenna, so if this is a S618PMR
radio, the antenna is not allowed to installed or removed, please noted!
To remove the battery pack, pull open the battery retention catch and
lift the battery pack from the body of the radio. (See
Figure
6)
Accessories Installation
Figure 7
Installing/Removing the Belt Clip
Hold the Belt Clip to the back of radio taking care to line up the holes,
insert the belt clip retention screws and tighten with a screwdriver.
(See Figure 8)
To remove the Belt Clip, unscrew the screws (anti-clockwise) with a
screwdriver and remove the belt clip.
OPEN
①
②
Accessories Installation
Figure 5
Figure 6
Snap the battery pack into place until you heard a click. Check that the
battery pack fits tightly in place against the body of the radio.
(See Figure 5)
7
8
Summary of Contents for SD618 Series
Page 2: ......
