background image

2

SAFETY AND GENERAL INFORMATION

Save these instructions. 

For your safety, read, understand, and follow the information provided with and on this 

device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics 

and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use 

and repair of this product may require special skills and knowledge. Instructions and safety information shall be read 

to and discussed with the operator in the operator's native language, making sure that the operator comprehends 

their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this 

device, remove from service immediately. 

Inspect before each use.

 Do not use if abnormal conditions such as cracked welds, damaged, loose or missing 

parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall 

be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an 

abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact 

distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be 

made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer. 

PRODUCT DESCRIPTION

This Hydraulic Service Jack is designed to lift, but not support, one end of a vehicle. Immediately after lifting, loads 

must be supported by a pair of appropriately rated jack stands. 

WARNING:

 Do not use hydraulic jack as stand-alone support device. After lifting, immediately support the lifted 

vehicle with a pair of appropriately rated jack stands.

SPECIFICATIONS

Model

Capacity

Jack Size (l x w x h)

Min.  Height

Max. Height

Saddle Dia.

AL2300

3 Ton

30-3/4" x 15" x 7-1/4"

5"

23-1/2"

6-3/4"

 

!

Figure 1 - AL2300 Service Jack Nomenclature

Saddle

Handle

Front Wheel

Handle Sleeve

Lift Arm

Vent  

Screw

Caster

Pump Piston

Summary of Contents for American Lifting AL2300









Reviews: