16
17
ENGLISH
ENGLISH
9. PADS SETUP INSIDE THE VEST
9.1 The pads have two distinct sides. The smooth part
should be on the outside of the garment.
In the picture above, the pads are upside down.
9.2 The breathing part with the mesh should be close
to the skin.
The picture above illustrates the correct way to
put the pads.
9.3 Slip on the pad inside the pocket, making sure
that the pad does not catch on the velcro closing
the pocket.
9.4 By putting the arm into the pocket, fully insert
the pad.
9.5 Verify that the velcro of the pad is well attached
to the inside velcro of the pocket. The pad must
not be bent or folded.
9.6 Connect the pad to the main cable.
9.7 Put the excess cable inside the pocket.
9.8 Repeat for all the pads.
