8
9
ENGLISH
ENGLISH
6. FITTING THE GLOVES
1. Put your sweater on and pull the power cable
out of the sleeve.
2. Put your drysuit on and route the cable under the
wrist seal.
Note: It is not necessary to add anything else
for the air passage between the glove and the
drysuits.
3. Put the heating glove on, and thread both cables
through the opening under the velcro strap.
4. Connect the power cable to the heating glove.
If necessary, hold the connector with the middle
fingers of the hand inside the glove.
5. For comfort reasons, it is best to leave the
connector on the lower part of the hand.
6. Alternatively, the connector can be pushed
under the velcro attachment at the wrist.
7. Put the dryglove on.
