FW5470 User's Manual
M4058-01
１１
Seyeon Tech Co., Ltd
2. Product Description
2.1. FW5470 Front View
Picture 2 : FW5470 Front Panel
A H I J
B C D E F G
Picture 3 : FW5470 LEDs at Front Panel
Name
Description
A
Power On/Off Switch
To turn on and off the power.
You must use it to turn off the power. Do not plug-out the power cable
before completely turned off by this button. Do not turn off during HDD format
process. It may cause damage on HDD.
B
POWER LED
Red light blinks when power is provided.
C
STATUS LED
Green light blinks after booting.
D
LAN LINK LED
Green light blinks when LAN is physically connected.
E
LAN(Tx/Rx) LED
Green light blinks when there is data transmission at the connected LAN.
F
HDD LED
Green light blinks when formatting or recording at HDD.
G
RECORDING LED
Red light blinks when HDD is recording.
H
USB port
USB port (reserved for future use)
I
Factory Default Switch
This button can reset the factory default settings at the system. Especially when a
user lost his/her admin-password, or when it got any uncertain faulty operation.
- After reboot the system, wait until hearing two times of beep sound.
- Keep pressing FD button for 5~10 seconds until hearing three times short beep
sound. ACT LED blinks during the process. The system will reboot automatically
when it
’s completed.
J
HDD ventilation halls
HDD ventilation halls.
Always ensure to Keep open and clean around this area.
Table 3 : FW5470 Front Panel
J
