Changing number of digits (codes)
Attention: this modification must be done before the first programming of a code
(factory setting = 4 digits)
Enter the master code
2 X
(Default code is 1234)
long BEEP + right LED will turn yellow
Enter
* 904
short BEEP + right LED will turn yellow
Enter the digits (
X
is from 2 to 6)
long BEEP + right LED will turn yellow
Enter
# #
right LED will turn green
Create a master card
The master card allows to open the setup session
Enter the master code
2 X
(Default code is 1234)
long BEEP + right LED will turn yellow
Enter
* 7
right LED will flash green
Swipe the master card
1 X
long BEEP + right LED will turn yellow
Entrer
# #
right LED will turn green
Changing a master card
Enter the master code
2 X
or swipe the master card
1 X
(Default code is 1234)
long BEEP + right LED will turn yellow
Enter
* 7
right LED will turn red
Enter
**
right LED will flash green
Swipe the master card
1 X
long BEEP + right LED will turn yellow
Entrer
# #
right LED will turn green
Changing a master code
It is recommended to modify the master code
w
hich allows to open the setup
session for security reasons
.
The user codes must be different from mastercode.
Enter the master code
2 X
or swipe the master card
1 X
(Default code is 1234)
long BEEP + right LED will turn yellow
Enter
* 3
right LED will flash yellow
Enter the new code
2 X
long BEEP + right LED will turn yellow
Enter
# #
right LED will turn green
SETTING MODE
Changing digit number erases all previous records!
If
X
= 2 the master code is
12
If
X
= 5 the master code is
12345
If
X
= 3 the master code is
123
If
X
= 6 the master code is
123456
If
X
= 4 the master code is
1234
!
How to restore the default master code (1234)
(in case of lost or forgotten master code)
Switch off the power supply from the keypad
Press
#
key. Keep it pressed for 3 seconds while
powering the device again
all LEDs light off
short BEEP + right LED will turn green
12/24
