background image

15

14

This feature allows experienced users to see exactly what data is coming to the printer. This can be 
useful in finding software problems.
When you go into the hex dump function, the printer prints all commands and other data in 
hexadecimal format along with a guide section to help you find specific commands.

To use the hex dump feature, follow these steps
1. Please turn printer off.
2. Please turn printer on while press down “Feed” button.
3. Press the FEED button three times when the Self Test printed.
4. Now printer had entered into Hexa dump mode.
5. Run any software program that sends data to the printer. The printer prints ”Hexadecimal printing 
mode…” and then all the codes it receives in a two-column format. The first column contains the 
hecadecimal codes and the second column gives the ASCII characters that correspond to the codes.

Hecadecimal Dump
1B 21 00 1B 26 02 40 40  .!..& . @ @
1B 25 01 1B 63 34 00 1B  .%..c4 ..
41 42 43 44 45 46 47 48  ABCDEFGH

 A period (.) is printed for each code that has no ASCII equivalent.

6. Turn off the printer.
7. Turn on the printer.

7. Hexadecimal Dump

ASCII PRINT is printing a test page constructed ASCII code. You can able to check the printer works 
properly with this
The ASCII PRINT test automatically ends and cuts the paper after printing the following:

*** Completed ***

The printer is ready to receive data as soon as it completes the ASCII PRINT.

5. ASCII Print

After entering the BAUDRATE MODE, the list which can select the BPS will be printed. Similar like Self Test, 
you can press the FEED button to select a BAUDRATE.
Once the input performs properly, the printer shows a result and store.
The printer is ready to receive data as soon as it completes the SELECT BAUDRATE MODE.

SELECT BAUDRATE BY BUTTON
1.     9600bps
2.   19200bps
3.   38400bps
4. 115200bps

6. Select Baudrate Mode

Summary of Contents for SLK-TL21 Series













Reviews: