3
1. Features
y
y
Power Supply Requirements
Either input 120VAC/Output 24VDC 2.5A for North America or Input 230VAC/Output
24VDC 2.5A for Europe with a 3pin mini-din connector power supply is provided.
y
y
Dip Switch Configuration
Emulation mode, CPL Select mode, Flow Control mode, Data Width/Parity, and
Baud Rate are all configured through dip switch settings.
y
y
Data Buffer
The printer has a built-in 48 Kilobyte I/O buffer allowing the host computer to
free itself after sending the print data.
y
y
Reliable communications
Centronics parallel or RS-232C compatible communications is built-in.
The printer supports multiple baud rates, emulations, and handshaking on its
parallel & serial interfaces.
y
y
User controls
A power switch, a paper forward FEED button, a paper BACKward feed button
and ON LINE button provide ease of use.
y
y
Self Test Mode
A comprehensive self-test mode is available which describes the printer
configuration and dip switch setting information along with the version number
of firmware installed.
y
y
Print orientation
The printer is capable of printing normal and upside down.
The print orientation is selected by software commands.
y
y
Selectable international characters
The printer supports international characters selectable by software control.
y
y
Multiple Fonts/Sizes
Two different resident fonts are available for printing diversity.
Each of these fonts can be printed in normal, double wide, double height,
and quadruple sizes. Both fonts and sizes are selected by software.
y
y
Error detection
The printer can detect paper-out and paper-jam as well as controller malfunction.
y
y
Peripheral Drive
Two cash drawer drivers are provided
