18
If the interior of the printer is dusty, printing quality can be reduced.
In this case, follow the instructions below to clean the printer.
NOTE
01
Make sure to turn the printer power off prior to cleaning.
02
Regarding printhead cleaning, as the printhead gets very hot during printing,
turn off the printer power and wait approximately 10 minutes before cleaning.
03
When cleaning the printhead, take care not to touch the heated portion of the
printhead. The printhead can be damaged by static electricity.
04
Take care not to allow the printhead to become scratched and /
or damaged in any way.
HEAD
1
Use an applicator swab moistened with an alcohol solution to clean the
printhead and remove any dust.
2
Once the cleaning is completed, wait a few minutes before inserting the paper
roll into the printer.
Preventing Overheating
To prevent the motor from overheating, stop the printer for at least 30 seconds
after continuously printing 1.5 meters.
6. Cleaning the Printer
Summary of Contents for LK-P25
Page 31: ...26 PATENT...
