SEWOO LK-D10, Manual

Page: 4 / 25

3
♣
Power Supply Requirements
Either input 120VAC/Output 24VDC 2.5A for North America or Input 230VAC/Output 24VDC 2.5A for
Europe with a 3pin mini-din connector power supply is provided.
♣
Di p Switch Configuration
Emulation mode, CPL Select mode, Flow Control mode, Data Width/Parity, and Baud Rate are all
configured through dip switch settings.
♣
Data Buffer
The printer has a built-in 48 Kilobyte I/O buffer allowing the host computer to free itself after sending
the print data.
♣
Reliable communications
Centronics parallel or RS-232C compatible communications is built-in. The printer supports multiple
baud rates, emulations, and handshaking on its parallel & serial interfaces.
♣
User controls
A power switch, a paper forward FEED button, a paper BACKward feed button and ON LINE button
provide ease of use.
♣
Self Test Mode
A comprehensive self-test mode is available which describes the printer configuration and dip switch
setting information along with the version number of firmware installed.
♣
Print orientation
The printer is capable of printing normal and upside down. The print orientation is selected by software
commands.
♣
Selectable international characters
The printer supports international characters selectable by software control.
♣
Multi ple Fonts/Sizes
Two different resident fonts are available for printing diversity. Each of these fonts can be printed
in normal, double wide, double height, and quadruple sizes. Both fonts and sizes are selected by
software.
♣
Error detection
The printer can detect paper-out and paper-jam as well as controller malfunction.
♣
Peri pheral Drive
Two cash drawer drivers are provided.
♣
Certification
(1) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) this device may not cause harmful interference , and
2) this device must accept any interference received , including interference that may cause
undesired operation.
(2) UL/cUL (UL 60950-1)
(3) MIC
(4) CE-EMCD (CE-EMCD Class B should use Parallel shield Cable complied with IEEE-1284 standards)
(5) RoHS (TUV)
(6) CCC
1. Features