manualshive.com logo in svg

SEWOO LK-B20 II, User Manual, Page: 3 / 35

Share
Download
SEWOO LK-B20 II User Manual Download Page 3

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions.

1) This device may not cause harmful interference, and 
2) This device must accept any interference received, 

including 

interference that may cause undesired operation.

Vic Barczyk

20280 S. Vermont Ave. STE 200, Torrance, CA 90502 | USA
[email protected]

Henning Mahlstedt

26188 Edewecht, Holljestr.9 | Germany
[email protected]

Victor Almazan

Paseo de la Reforma No. 265 Piso 2.Oficina SBC. Col. 
Cuauhtémoc, C.P. 06500 Ciudad de Mexico | Mexico
[email protected]

Yan xiao rui

Room 902, No. 7, Lane 118, Xiaojishan Road, Sheshan Town, 
Songjiang District, Shanghai | China
[email protected]

Risk of explosion if battery is replaced by an incorrectly type. 

Dispose of used battery according to the local disposal instructions.

Disposal of Old Electrical&Electronic Equipment(Applicable in 

the European Union and other European countries with separate 

collection systems)

This symbol on the product or on its packaging indicates that this product 

shall not be treated as household waste. Instead it shall be handed over to 

the applicable collection point for the recycling of electrical and electronics 

equipment. For more detailed information about recycling of this product, 

please contact your local city office, your household waste disposal service 

or the shop  where you purchased the product.

Summary of Contents for LK-B20 II




































Reviews:

No comments