30
3 Operation
Device inspection
Used to switch the integrated device inspection on or off.
Reset
Used to reset the device settings to the factory settings.
Language
Sets the language.
3.3.5
Alarms
Used to set the alarm threshold and the dynamic signal.
Note:
The
ALEOS
alarm cannot be adjusted. It always occurs at the
end of the measuring range.
There is detailed information on alarms in Section 7.2 on
ALPPM
Sets the alarm threshold for exceeding significant gas concentra
-
tions in the ppm range, which indicate a gas leak.
Application:
– Inspection above ground
– House
Dynamic signal
Switches the dynamic signal off or on.
See Section 2.1 on page 7 for detailed information on the
dynamic signal.
3.3.6
Date/time
Used to set the time, day, month and year. There are two formats
available for the date.
