29
3 Operation
3.3.4
System
General information and specifications for operation are set in
the System menu.
PIN code
Used to change or reset the PIN code.
Note:
If you lose the PIN code, you must contact SEWERIN Service.
If the PIN code is set to
0000
, you will not be asked to enter it.
The settings can then be accessed by anyone.
Service interval
Specifies the regular inspections/maintenance required for the
device. You can also activate the automatic switch-off function
once the set interval has passed.
Display
Used to set how long the display remains illuminated after any
key is pressed as well as the display contrast.
Battery
Used to set the type of disposable/rechargeable battery used.
A
NOTICE!
The battery type setting must always be correct to prevent
damage to the device.
Autostart
Sets the application that is automatically activated when the de-
vice is switched on.
