background image

61

7  Appendix

7.11 

Terminology and abbreviations

ALEOS

 

Alarm at end of measuring range (end of 

scale)

ALPPM

 

Adjustable alarm in ppm range

CENELEC

 

European Committee for Electrotechnical 

Standardization

NiMH

 

Nickel metal hydride

ppm

 

Parts per million

Ring memory

 

Type of data storage in the device

 

If the available storage space is full, the 

oldest file is automatically overwritten by 

the current file.

SC

 

Gas-sensitive semiconductor

Stack memory

 

Type of data storage in the device

 

If the available storage space is full, you 

are prompted to confirm whether the old

-

est file should be overwritten by the cur

-

rent file.

TC

 

Thermal conductivity sensor

VOL

 

Volume

7.12 

Referenced documents

The following standards, guidelines and regulations are referred 

to in these operating instructions:

/1/  DVGW G 465-4 

Deutsche Vereinigung des Gas- und Wasserfaches e. V. (German 

Association of Gas and Water Specialists); Regulation G 465-4: 

Gasspür- und Gaskonzentrationsmessgeräte für die Überprüfung 

von Gasanlagen (Gas-Detection and Gas-Concentration Measure-

ment Devices for Inspection of Gas Systems)

 

Available for download at: www.dvgw.de

/2/  EN 60079-7:2007

/3/  EN 60086-1

/4/  EN 61951-2

/5/ 

94/9/EC (ATEX 100a)

Summary of Contents for VARIOTEC 460 Tracergas









































































Reviews: