15
4 Electroacoustic water leak detection
Electroacoustic water leak detection
4.2.3
“MAX” mode
This mode helps detect pipelines by acoustic means. Instead
of showing the minimum values, this mode always shows the
maximum values.
“MAX” appears in the display when this mode is activated. The
mode is not saved.
4.2.4
Default values
This function restores (resets) all the default settings (factory set
-
tings) of AQUAPHON mode.
4.2.5
Measuring mode
This setting determines how the rotary regulator activates/deac
-
tivates a measurement or the headphones.
1 x press
The measurement is activated by briefly pressing the rotary regu
-
lator and will remain active for as long as the rotary regulator is
pressed down. The measurement is deactivated when the rotary
regulator is released. This key principle is the default setting.
2 x press
The measurement is activated by briefly pressing the rotary regu
-
lator. The measurement is only deactivated when you press the
rotary regulator again (switch principle).
