sewerin Multitec 540, Operating Instructions Manual

Page: 37 / 64

30 │ 5 Maintenance
5.1.2 Performing the device inspection
5.1.2.1 Accessing the device inspection
The device is in measuring mode.
1. Press Device inspection .
OR
a) Press Menu .
b) Select Device inspection from the menu.
The
Device inspection
menu appears.
2. Select an application ( Interspace , Bar holes/measuring ).
The Dev. Test ... menu appears.
3. Select a test (fig. 11).
Note:
The number and names of the available menu items depend on
the device features.
4. Perform the test.
For detailed information, refer to the following sections:
− General status section 5.1.3
− Fresh air section 5.1.4
− Test gas … section 5.1.5
General status
Fresh air
1.00 VOL% CH4
General status
Fresh air
Gas mixture measuring
Test gas CO
Fig. 11: Tests making up the device inspection
Left image: Interspace application
Right image: Bar holes/measuring application
(
here:
device with CO sensor)