1 Introduction
│
1
1
Introduction
1.1
Information about this document
This document is a component part of the product.
●
Read the document before putting the product into operation.
●
Keep the document within easy reach.
●
Pass this document on to any subsequent owners.
● Unless otherwise specified, the information in this document
refers to the product as delivered (factory settings) and applies
to all product variants.
Translations
Translations are produced to the best of our knowledge. The
original German version is authoritative.
Right of reproduction
No part of this document may be edited, duplicated or circulated
in any form without the express consent of Hermann Sewerin
GmbH.
Registered trademarks
Registered trademarks are generally not indicated in this docu-
ment.
1.2
Purpose
The portable
FG 50
generator is part of the
FERROPHON
sys-
tem.
The generator is used to energize lines when locating pipes. It
can be used with selected receivers of the
AQUAPHON
system,
e.g.
AF 50
receiver.
Note:
These operating instructions describe the functions of the
FG 50
generator
with firmware version 1.xxx. The manufacturer re
-
serves the right to make changes.
