2
│ 1 Introduction
1.2
Purpose
The
AQUAPHON
system with
A 50
receiver is intended for elec-
tro-acoustic water leak detection. The system can be used both
outdoors and inside buildings.
The following uses are possible:
●
Preliminary detection
− at fittings (e.g. hydrants, slide gates)
●
Pinpointing leaks
−
on paved surfaces (e.g. asphalt, concrete, paving)
−
on unpaved surfaces (e.g. gravel, crushed rock, grass)
Note:
The descriptions in these operating instructions relate to the sys-
tem as delivered (factory settings). The manufacturer reserves
the right to make changes.
1.3
Intended use
The system is intended for professional industrial and commer-
cial use. The appropriate specialist knowledge is required to op-
erate the system.
Note:
If necessary, learn more about the principles of the technology
before commencing practical work with the system.
The system must only be used for the applications specified in
