4
Interface adapter USM21A
Scope of delivery
Manual – Interface Adapter USM21A
7
4
Interface adapter USM21A
With the interface adapter USM21A, it is possible to connect an engineering PC with a
USB interface to the diagnostic slot of a unit from SEW‑EURODRIVE.
17824966283
The interface adapter is connected to the engineering PC via a type B USB port. The
data is transferred according to the USB 2.0 standard. It is also possible to work with a
USB 3.0 unit.
The adapter communicates with the unit via an RJ10 socket. Depending on the sup-
ported interface standard of the diagnostic interface, the interface adapter is connec-
ted to the RS485 interface or the system bus interface (CAN) of the unit. The design
and baud rate of the used interface is specified in the engineering software
MOVITOOLS
®
MotionStudio or MOVISUITE
®
, depending on the unit type and the re-
quirements. For more information, refer to the section "Connecting the interface ad-
apter".
4.1
Scope of delivery
The delivery with part number 28231449 includes the following components:
•
Interface adapter USM21A
•
USB connection cable
•
Interface cable with 2 RJ10 connectors
4.1.1
Optional scope of delivery
The following connection cables can be optionally obtained from SEW‑EURODRIVE:
Optional scope of delivery (connection cables)
Part number
Interface cable with RJ10 connector and 9‑pin D‑sub connector
18123864
Interface cable with RJ10 connector and M12 socket
28111680
USB connection cable
08186804
Interface cable with 2 RJ10 connectors
08146993
28516273/EN – 11/2018
