SEW-Eurodrive PSH CM2H Series, Operating Instructions Manual

Page: 9 / 68

2
Safety notes
Designated use
Operating Instructions – Stainless Steel Servo Gearmotors
9
Specialist for elec-
trotechnical work Any electrotechnical work may be performed only by electrically skilled persons with a
suitable education. Electrically skilled persons in the context of this documentation are
persons who are familiar with electrical installation, startup, troubleshooting, and main-
tenance of the product who possess the following qualifications:
• Qualifications in the field of electrical engineering in accordance with the national
regulations
• Familiarity with this documentation
Additional qualifi-
cations In addition to that, these persons must be familiar with the valid safety regulations and
laws, as well as with the requirements of the standards, directives, and laws specified
in this documentation.
The persons must have the express authorization of the company to operate, pro-
gram, parameterize, label, and ground devices, systems, and circuits in accordance
with the standards of safety technology.
Instructed persons All work in the areas of transport, storage, installation, operation and waste disposal
may only be carried out by persons who are trained and instructed appropriately.
These instructions must enable the persons to carry out the required activities and
work steps safely and in accordance with regulations.
2.4 Designated use
The product is intended for use in industrial and commercial systems.
In the case of installation in electrical systems or machines, it is prohibited to start the
proper operation of the product until it is determined that the machine meets the re-
quirements stipulated in the local laws and directives.
The standards given in the declaration of conformity apply to the product.
2.5 Magnetic fields
The rotor of the motor is equipped with permanent magnets. The magnets emit strong
magnetic fields, even when no current is supplied. If permanent magnets are exposed,
e.g. in case of removed rotor, health hazards may arise. This especially applies to per-
sons with active medical implants.
Further, exposed permanent magnets cause strong forces of attraction with magnetiz-
able materials, such as other motor components or tools. The attraction of other ob-
jects can cause severe injuries by crushing.
During operation, additional electromagnetic fields are generated.
Observe DGUV (German Social Accident Insurance) regulation 15 – "Electromagnetic
fields" for use in industrial workplaces. In other countries, the corresponding national
and local regulations and provisions must be complied with.
26880490/EN – 05/2022