background image

1

General information

Decimal separator in numerical values

Operating Instructions – OPT11D-150-0

6

1.3.2

Structure of section-related safety notes

Section-related  safety  notes  do  not  apply  to  a  specific  action  but  to  several  actions
pertaining to one subject. The hazard symbols used either indicate a general hazard
or a specific hazard.

This is the formal structure of a safety note for a specific section:

SIGNAL WORD

Type and source of hazard.

Possible consequence(s) if disregarded.

Measure(s) to prevent the hazard.

Meaning of the hazard symbols

The hazard symbols in the safety notes have the following meaning:

Hazard symbol

Meaning

General hazard

1.3.3

Structure of embedded safety notes

Embedded safety notes are directly integrated into the instructions just before the de-
scription of the dangerous action.

This is the formal structure of an embedded safety note:

 SIGNAL WORD!

 Type and source of hazard. Possible consequence(s) if disregar-

ded. Measure(s) to prevent the hazard.

1.4

Decimal separator in numerical values

In this document, a period is used to indicate the decimal separator.

Example: 30.5 kg

1.5

Rights to claim under limited warranty

Read  the  information  in  this  documentation.  This  is  essential  for  fault-free  operation
and fulfillment of any rights to claim under limited warranty. Read the documentation
before you start working with the product.

1.6

Product names and trademarks

The  brands  and  product  names  in  this  documentation  are  trademarks  or  registered
trademarks of their respective titleholders.

26867257/EN – 02/2021

Summary of Contents for OPT11D-150-0





















































Reviews: