2
MOVIDRIVE
®
DFC11A CAN Bus
Important Notes
Important Notes
•
Read this Manual carefully before you start installation and commissioning work on
MOVIDRIVE
®
drive inverters with CAN bus.
This manual assumes that the user is familiar with and has at his disposal all relevant
documentation on the MOVIDRIVE
®
system, in particular the manual and the Installation
and Operating Instructions.
•
Safety Instructions:
Always follow the warnings and safety instructions contained in this manual.
Safety instructions are marked as follows:
Electrical hazard, e. g. during live working
Mechanical hazard, e. g. when working on hoists
Important Instructions for the safe and fault-free operation of the driven machine /
system, e.g. pre-settings before commissioning
•
General safety instructions for bus systems:
The fieldbus option provides you with a communications system which allows you to match
the MOVIDRIVE
®
drive inverter to the specifics of your application to a very high degree. As
with all bus systems there is, however, the risk of a programming error in the program
which may result in unexpected (though not uncontrolled) system behaviour.
•
In this manual, cross-references are marked with a
→
, e.g.,
(
→
MX_SCOPE) means: Please refer to the MX_SCOPE Manual for detailed information or
information on how to carry out this instruction.
(
→
Section x.x) means: Further information can be found in Section x.x of this manual.
•
Each unit is manufactured and tested to current SEW-EURODRIVE technical standards and
specifications.
The manufacturer reserves the right to make changes to the technical data and designs
which are in the interest of technical progress.
A requirement for fault-free operation and fulfilment of any rights to claim under guarantee
is that these instructions and notes are followed.