TF141015
STEP 7
STEP 8
STACKING
On the back of the organizer, place Cross Bar Supports (H) across the
three vertical panels (B, C, E) and use Screws (I) to secure them in
place. NOTE: The Cross Bar Supports (H) were designed to partially
wrap around the vertical supports for a secure fit. Make sure the bar
faces the vertical supports properly.
Turn the assembled organizer unit upside down and slide each of the
6 Feet (J) on the Base Panel (A) posts.
1) Assemble the second Organizer, but do not attach the Feet (J).
2) Remove the Top Panel (F) from the first Organizer (the unit to
be placed on the bottom).
3) Carefully lift and place the second Organizer over and onto the
three vertical supports (B, C, E) of the bottom unit making sure the
posts on Base Panel (A) of the top unit slide into all 6 of the vertical
support holes of the bottom unit.
