Seville Classics UltraShield WEB657 Quick Start Manual Download Page 2

Page: 2 / 2

Parts List

Please make sure you have all the parts on this list.

If you’re missing parts, contact us for replacements at

(800) 323-5565 or send an email to [email protected]

A. Panels (1)

D. Gaskets (4)

B. Clamps (2)

E. Long screws (2)

C. Feet (2)

F. Small screws (4)

Step 1.

Align FEET (C) side-by-side by aligning
the screw holes.

Pull apart CLAMPS (B).

Fit bottom CLAMPS (B) over holes with
front side (no hole) towards logo.

Step 2.

Fit GASKETS (D) into CLAMPS (B).

Attach with SMALL SCREWS (F).

Assembly Instructions

Required tools (not included): Phillips screwdriver

Step 3.

Lay ACRYLIC PANEL (A) flat on table.

TIP: Do not remove panels from bags.
Open one side of bags to install feet.

Fit bottom of panel into
metal lip of the CLAMP (B).

Step 4.

Slide upper CLAMP (B) onto lower
clamp. Make sure panel sits above
the metal lip.

Press together until snug.

Step 5.

Attach CLAMPS (B) with LONG
SCREWS (E). Repeat for other side.

Summary of Contents for UltraShield WEB657

Page 1: ...tructions Simply set the shields in place to use To change the orientation of the shield Remove the LONG SCREWS E in Step 5 Unclamp the feet from the panels Reattach to the other side and re insert LO...

Page 2: ...it bottom CLAMPS B over holes with front side no hole towards logo Step 2 Fit GASKETS D into CLAMPS B Attach with SMALL SCREWS F Assembly Instructions Required tools not included Phillips screwdriver...