PARTS:
X 1
LED Shop Light
X 2
Hanging Chains
x 4
“S” Hooks
x 2
Eye Hook Screws
x 6
Plastic Anchors
x 4
Screws
x 1
Cotton Rope
Rated: 120V-60Hz 40W
READ ALL THE INSTRUCTIONS AND SAVE THIS INSTRUCTION SHEET.
NOT READING THE INSTRUCTIONS MAY CAUSE RISK OF FIRE OR PERSONAL INJURY
CAUTION:
To reduce the risk of fire, electric shock or injury to people:
• Suitable for damp/dry locations.
• Not for use with dimmers.
• Use only insulated staples or plastic ties to secure the cord.
• Do not install directly over a heat source (stove, etc.)
• Use safety precautions. Safety eye glasses and gloves are recommended.
• Installation should not be made on a radiant-heating ceiling.
• Injury to people and damage to the lamp and/or mounting surface may result if the lamp is
pulled from the surface. To reduce the likelihood of such injury or damage, mount only on a
mechanically sound surface.
• Please do not link other electrical appliances at the link end.
• Do not alter the plug or power supply cord in any way or try to install this product in any other
method besides method shown on this sheet.
NOTE:
1. This fixture complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
2.
To install onto a plaster board surface, plaster board requires minimum 3/8” thick.
2. Install the 2 plastic ancho
rs 47 1/4” apart, then screw the eye hook into each anchor.
47 1/4"apart
