TIP:
WARNING:
Step 1: Install Front Frame (#28) to Wood Top (#3)
Step 3:
Install the Right Panel (#2)
Step 2:
Install Left Panel (#1)
Attach Left Panel (#1) to Front Frame (#28), making
sure the "Top" of Left Panel (#1) is on the Wood Top
(#3). Use 5 pcs of Screw A (#14) to tighten.
UltraHD® 2-Drawer Storage Cabinet (Model No. 20213)
*NOTE: We recommend using TWO people to assemble the cabinet.
Some parts may have sharp edges. To avoid injury,
wearing gloves is recommended during assembly.
A magnetic screwdriver is included for your
convenience. If a power screwdriver is used, keep
on a low torque setting.
Attach the Right Panel (#2) to the Front Frame
(#28),make sure the "Top" of Right Panel (#2) is
close to the Wood Top (#3). Again, the “Top” is
indicated by a sticker on one of the vertical columns.
Use 5 pcs of Screw A (#14) to tighten.
Open both boxes, locate and remove the cardboard
box containing the Wood Top (#3). Set the other
parts to the side.
When assembling this item, place the Wood Top up
side down on the cardboard to avoid scratching the
top surface.
Place the Front Frame (#28) as the left picture
shows
and use 2 pcs Screw A (#14) to tighten.
Attach the
"Top" of the Front Frame (#28), as indicated by the
attached sticker, to the Wood Top (#3).
(The Wood Top has set front or back end,
make sure
to assemble on the front side of the
wood top).
Front
Back
Front
Back
#3
#14
#28
#1
#2
#14
#1
#14
6
Summary of Contents for UltraHD 20213
Page 2: ...1...
Page 3: ...20 Drawer 2...
