Step 8:
Step 9: Install Leveling Feet (#6).
Lift the Storage Cabinet upright after this step
Step 10: Install Corner Protection (#17)
1). Attach Corner Protection on the Top, Middle
and Bottom corners of the cabinet, use 24pcs
Screw N (#54) to tighten.
ASSEMBLY INSTRUCTIONS
(pg 10 of 13)
UltraHD Storage Cabinet (Model No.
20164
)
Install Back Panels (#8, #9 and #10)
1). Attach Bottom Back Panel(#10) onto both
Bottom of Left and Right Side Panels (#1-A2 and #2-
A2) and Bottom Panel (#4).
2) Attach both Middle Back Panel (#9) above
Bottom Back Panel (#10) the same way. Place the
groove of the Middle Back Panel (#9) onto the top
edge of the Bottom Back Panel (#10).
3) Place the Upper Back Panel (#8) the same way.
4) Line up all the screw holes, use 29pcs (#41)
Screw F to tighten the Back Panels.
Install Leveling Feet (#6) into the largest corner
holes of the Bottom Panel (#4), use Wrench (#25)
to tighten.
